Carbon Fiber Rings

Our Carbon fiber rings are all made by hand in the USA, by our designer Adam. Adam has been making the carbon fiber line of rings since 2003. You will love the feel and look Carbon fiber as your wedding ring or just an everyday ring to wear. Carbon fiber has an amazing strength to weight ratio and is used in aerospace and formula one racing cars. Remember that all of our rings are still fabricated by hand in our small composites shop and we aim to give you top quality service.


NARROW RING / POLISHED $125 Our narrow carbon fiber ring was one of the very first ring we created back in late 2003. This ring is about less than 1/4" wide or slightly wider than 6mm across its face. While the ring is one of our most basic designs it is also one of our biggest sellers. The simplicity of this design really shows off that beautiful 2x2 twill carbon pattern we all love. Our new polished finish offers a semi gloss ring with a very durable surface. For the first time no coatings are used in any of our rings. Each ring is individually wet sanded through 10 stages of sanding with a final application of buffing compound. We offer rings in standard sizes 4.5-13.5 in whole and half sizes. 6mm width Sizes in half size increments from 4.5 to 13.5 custom widths are available as custom orders for $45 custom ring widths are subject to a 25% restocking fee if returned or exchanged	NARROW RING / UNI ENDURANCE $120 This ring features the same narrow dimension but is now available with a new uni-directional carbon fiber and endurance (matte) finish. Instead of using woven carbon fibers you will notice the carbon fibers on the exterior layer run across the width. We use a proprietary sanding technique to make this ring shimmer in the sun. 6mm width Sizes in half size increments from 4.5 to 13.5 custom widths are available as custom orders for $45 custom ring widths are subject to a 25% restocking fee if returned or exchanged

NARROW RING / UNI POLISHED $125 Yet another version of our narrow ring. This uni-directional carbon band has been worked through our proprietary wet sanding process through progressively more fine sand paper grits and finally buffed to a high polish. This ring is unlike anything on the market today! It almost looks like some type of strange metal but it is 100% carbon fiber with a weight of just over a single gram! Here is your friendly sizing reminder again... We offer all of our rings in standard sizes 4.5-13.5 in whole and half sizes. 6mm width Sizes in half size increments from 4.5 to 13.5 custom widths are available as custom orders for $45 custom ring widths are subject to a 25% restocking fee if returned or exchanged	NARROW RING / ENDURANCE $120 This 2x2 twill carbon fabric narrow ring with endurance (matte) finish is our most durable ring finish! If you are very active or tend to abuse jewelry this is the best option for you. Since the ring has a matte finish and a fabric outer layer it hides many scuffs that may show up more on a polished ring. We offer all of our rings in standard sizes 4.5-13.5 in whole and half sizes 6mm width Sizes in half size increments from 4.5 to 13.5 custom widths are available as custom orders for $45 custom ring widths are subject to a 25% restocking fee if returned or exchanged

ORIGINAL RING / POLISHED $125 Our original carbon fiber ring was the very first ring we created back in late 2003. This ring is a little less than 3/8" wide or slightly wider than 9mm across its face. While the ring is one of our most basic designs it is also our biggest seller. The simplicity of this design really shows off that beautiful 2x2 twill carbon pattern we all love. Our new polished finish offers a semi gloss ring with a very durable surface. For the first time no coatings are used in any of our rings. Each ring is individually wet sanded through 10 stages of sanding with a final application of buffing compound. We offer rings in standard sizes 4.5-13.5 in whole and half sizes 9mm width Sizes in half size increments from 4.5 to 13.5 custom widths are available as custom orders for $45 custom ring widths are subject to a 25% restocking fee if returned or exchanged	ORIGINAL RING / UNI ENDURANCE $120 This ring features the Original dimensions but is now available with a new uni-directional carbon fiber and endurance (matte) finish. Instead of using woven carbon fibers you will notice the carbon fibers on the exterior layer run across the width. We use a proprietary sanding technique to make this ring shimmer in the sun 9mm width Sizes in half size increments from 4.5 to 13.5 custom widths are available as custom orders for $45 custom ring widths are subject to a 25% restocking fee if returned or exchanged

ORIGINAL RING / UNI POLISHED $125 Yet another version of our Original style ring. This uni-directional carbon band has been worked through our proprietary wet sanding process through progressively more fine sand paper grits and finally buffed to a high polish. This ring is unlike anything on the market today! It almost looks like some type of strange metal but it is 100% carbon fiber with a weight of just over a single gram! Here is your friendly sizing reminder again... We offer all of our rings in standard sizes 4.5-13.5 in whole and half sizes 9mm width Sizes in half size increments from 4.5 to 13.5 custom widths are available as custom orders for $45 custom ring widths are subject to a 25% restocking fee if returned or exchanged	ORIGINAL RING / ENDURANCE $120 This Original 2x2 twill carbon fabric ring with endurance (matte) finish has been a top seller for quite some time. It is our most durable ring! If you are very active or tent to abuse jewelry this is the best option for you. Since the ring has a matte finish and a fabric outer layer it hides many scuffs that may show up more on a polished ring. We offer all of our rings in standard sizes 4.5-13.5 in whole and half sizes 9mm width Sizes in half size increments from 4.5 to 13.5 custom widths are available as custom orders for $45 custom ring widths are subject to a 25% restocking fee if returned or exchanged

FORTY-FIVE RING / POLISHED - $125 For the first time ever we are offering the Forty-Five ring. We simply rotated our normal 2x2 twill fabric 45 degrees prior to cutting and layup to produce a very interesting visual effect. Initially we are building all Forty-Five rings to order so the lead time on shipping this ring is 1-2 weeks until we build up our stock. Our new polished finish offers a semi gloss ring with a very durable surface. For the first time no coatings are used in any of our rings. Each ring is individually wet sanded through 10 stages of sanding with a final application of buffing compound. We offer rings in standard sizes 4.5-13.5 in whole and half sizes. 9mm width Sizes in half size increments from 4.5 to 13.5 custom widths are available as custom orders for $45 custom ring widths are subject to a 25% restocking fee if returned or exchanged	FORTY-FIVE RING / POLISHED - $125 For the first time ever we are offering the Forty-Five ring. We simply rotated our normal 2x2 twill fabric 45 degrees prior to cutting and layup to produce a very interesting visual effect. Initially we are building all Forty-Five rings to order so the lead time on shipping this ring is 1-2 weeks until we build up our stock. Our new polished finish offers a semi gloss ring with a very durable surface. For the first time no coatings are used in any of our rings. Each ring is individually wet sanded through 10 stages of sanding with a final application of buffing compound. We offer rings in standard sizes 4.5-13.5 in whole and half sizes. 9mm width Sizes in half size increments from 4.5 to 13.5 custom widths are available as custom orders for $45 custom ring widths are subject to a 25% restocking fee if returned or exchanged

BULLET RING / POLISHED - $159 (shown) BULLET RING / ENDURANCE (Matte Finish)- $154 Our amazing Bullet ring takes styling cues from the aerospace and racing industries with precision machined speed holes. The body of each Bullet ring is hand contoured and each opening is chamfered and deburred inside and out using a proprietary process we developed just for this ring to ensure comfort. This ring measures 10.5mm across it's face. Our new polished finish offers a semi gloss ring with a very durable surface. For the first time no coatings are used in any of our rings. Each ring is individually wet sanded through 10 stages of sanding with a final application of buffing compound. We offer rings in standard sizes 4.5-13.5 in whole and half sizes. 10.5mm width Sizes in half size increments from 4.5 to 13.5 custom widths are available as custom orders for $45 custom ring widths are subject to a 25% restocking fee if returned or exchanged	BULLET RING / UNI ENDURANCE - $154 (Shown) BULLET RING / UNI POLISHED- $159 This ring features the Bullet dimensions but is now available with a new uni-directional carbon fiber and endurance (matte) finish. Instead of using woven carbon fibers you will notice the carbon fibers on the exterior layer run across the width. We use a proprietary sanding technique to make this ring shimmer in the sun. 10.5mm width Sizes in half size increments from 4.5 to 13.5 custom widths are available as custom orders for $45 custom ring widths are subject to a 25% restocking fee if returned or exchanged